News

Home > News > Content

Alloy Aluminum Coil Performance Characteristics

Asian Aluminium Depot Co.,Ltd | Updated: Nov 02, 2017

It is well known that aluminum alloy roll is widely used in construction.As the aluminum alloy is easy to oxidize, it is necessary to strengthen the maintenance of aluminum alloy roll, so only in daily life to do the maintenance of aluminum alloy roll work in order to ensure efficient aluminum alloy Safe use. The following is a detailed description of the maintenance of aluminum alloy roll method.

1, aluminum alloy roll in the transport process, must be covered with a sheet of cloth, prevent rain, snow intrusion must ensure that the surface of the oxide film and paint film is not destroyed, while the selection of qualified cement, sand.

2, the storage environment should be dry, bright, well ventilated, no corrosive climate in the storage, for the bottom of the moisture must be padded with the ground and separated from the ground to maintain the distance with the ground more than 10CM.

3, is strictly prohibited with the chemical materials and moisture materials stored together. Alloy aluminum roll in the processing into doors, windows, regularly with a net cloth and neutral

Alloy aluminum roll, in the field of modern architectural decoration has a wider range of application value, alloy aluminum roll superior product performance is more and more friends to accept.In order to make better use of alloy aluminum roll, and we simply introduce aluminum alloy Anti - oxidation measures.

Placed in the space to strengthen the air dry management, to ensure that the compressed air in the water to strengthen the management of rolling oil, the water content of 0.04% below the aluminum foil roll packaging should be sealed, and each volume should be placed in the appropriate amount Desiccant.

Alloy aluminum roll box of the wooden shaft, the humidity of the box board is not greater than 18%, packaging aluminum roll temperature is not greater than 45 ° C. From the low temperature area into the high temperature, humidity areas, do not immediately open the sealed packaging. , The warehouse roof leakage, snow place should not be placed aluminum roll.

Alloy aluminum roll is one of the main products of our company. If the alloy aluminum roll is not properly transported and stored, it is very likely that it will bring some inconvenience to the future use. Therefore, we must strictly abide by the transportation method of aluminum alloy With regard to the transport of aluminum alloy, the following article content is the best answer to this question, then let us work together to understand the next bar.

1, is strictly prohibited with chemical materials and moisture materials stored together. Alloy aluminum roll in the processing into doors, windows, regularly with a clean cloth and neutral cleaning.

2, the storage environment should be dry, bright, well ventilated, no corrosive climate in the storage, for the bottom of the moisture must be padded with the ground and separated from the ground to maintain the distance with the ground more than 10CM.

3, aluminum alloy roll in the transport process, must be covered with a sheet of cloth, prevent rain, snow intrusion must ensure that the surface of the oxide film and paint film is not destroyed, while the selection of qualified cement, sand.

Alloy aluminum roll corrosion resistance is good, suitable for spot welding, atomic hydrogen welding, gas welding, argon arc welding. Its machinability, annealing state is very poor, semi-cold hardening state is still good.In addition, because of its good resistance Corrosion, sufficient strength, excellent process performance and welding performance. Before this site for everyone to introduce a bit on the aluminum alloy of the knowledge, in order to allow you to more understanding of the alloy aluminum roll, and thus better use. To tell you about the performance characteristics of alloy aluminum roll, the information provided to everyone useful.

1, mechanical, the choice of high-quality aluminum, plastic and adhesive, the use of advanced composite process. Products with decorative panels required bending, bending strength, in the four seasons climate, wind pressure, temperature, humidity and other factors Change, will not cause bending, deformation, expansion and so on.

2, alloy aluminum roll flatness, the surface without compound high temperature indentation. Board no residual stress, no deformation after cutting.

3, weatherability, then coating, high temperature baking from the paint pattern, high gloss retention, color stability, color change is minimal. Polyester paint quality assurance 10 years, Fluorocarbon paint warranty for more than 20 years

4, environmental protection, anti-salty acid rain corrosion, their own will not corrode live toxic bacteria, do not release any toxic gases, does not cause keel and fixed pieces of corrosion, flame retardant. According to state regulations not less than B1 level.

5, alloy aluminum roll of decorative, painted grain, stone, a realistic physical texture, a natural natural beauty. Patterns and do, to the customer a wide range of personality options, to enrich the human content of the product, to the people More beautiful enjoyment.


Our Service

The company have a good and long-term strategic cooperative relationship with Chinalco, Nanshan Aluminum, WANJI Aluminium, ZhongFu Industrial, and so on which are domestic well-known brand aluminium manufacturers.

Feedback

Contact Us

Address:No.78 Gucheng Road(M.) Yushan Town, Kunshan City, Jiangsu Provice, China

Tel: +0086-512-36630592

Fax: +0086-512-36630595

E-mail: info@al-plate.com

CopyRight© Asian Aluminium Depot Co.,Ltd